Livemar Floating Layer Anchor
The cape anchor is used for reduce speed of a boat in extreme sea and wind conditions. Additionally, it is used for give stability Y address during a drift.
Characteristic
- floating layer anchor
- Brand: LIVEMAR.
- Compatible with rafts, lifeboats and rescue boats in accordance with the 1983 amendments to SOLAS 74-78.
- Includes: Drag and recovery rope.
- White color
- Homologation: Nº11-0291
Measurements and Uses
Product | Length (mm) | diameter (mm) | Rafts | Boats |
Layer Anchor 400 mm | 600 | 400 | 10 people | – |
Layer Anchor 500 mm | 670 | 500 | 11-25 people | – |
Layer Anchor 600 mm | 780 | 600 | > 25 people | < 6 meters |
Layer Anchor 700 mm | 920 | 700 | – | 6 < 9 meters |
Layer Anchor 800 mm | 1.050 | 800 | – | > 9 meters |
Instructions for use
Using the handles in the largest opening (C), a rope connected to the boat (B) is attached. The rope must be at least 5 times the length of the boat (A). The larger the layer anchor size, the more efficient it will be. To bring the cape anchor on board use a second line attached to the handle in the smaller opening (D). To make it visible that you are using a cape anchor and prevent the rope from being overwhelmed by other boats, you can attach a floating buoy to the rope used to remove the anchor (E).
Clarification: This is general information and there may be variations due to various factors such as the shape and weight of your boat.
Reviews
There are no reviews yet.