Stainless Steel Male spigot hose connection Figure 399
Reducing sleeve with male end, i.e. with cylindrical external thread and with a pin end. The figure is used to make a connection of ends with different thicknesses, reducing the fluctuation through the pipe.
The figure has two finishes:
- Satin Male Hose Junction.
- Polished Male Hose Junction in solid manufacturing, this being heavier.
The pieces have a cylindrical thread compatible with European standards, all the figures are marked with the quality of stainless steel, and the pieces with a satin finish are marked with the dimensions of the piece.
Measurements of the Satin Figure
Product | AND | J | k | OR | V | you | S |
Junction Figure 399 1/4” x 9 mm | 8 | 10,5 | 4 | 28 | 5 | 9 | 15 |
Junction Figure 399 3/8” x 11.5 mm | 11,5 | 11 | 5 | 33 | 7 | 11,5 | 18,5 |
Junction Figure 399 1/2” x 15 mm | 16 | 14 | 7 | 27 | 8,5 | 15 | 22 |
Junction Figure 399 1” x 27 mm | 26 | 18 | 6 | 52 | 22 | 27 | 34 |
Junction Figure 399 1 1/4” x 33 mm | 34,5 | 20,5 | 6,5 | 52 | 27,5 | 33 | 44 |
Junction Figure 399 1 1/2” x 40 mm | 40 | 20 | 6,5 | 55 | 34 | 39 | 49,5 |
Junction Figure 399 2” x 53 mm | 51 | 25 | 7,5 | 60 | 45,5 | 52 | 61,5 |
All measurements are expressed in millimeters and inches.
Measurements of the Polished Figure
Product | D | EITHER | L | E/C |
Junction Figure 399 1/4” x 12 mm | 1/4″ | 12 | 39 | 17 |
Junction Figure 399 1/2” x 19 mm | 1/2″ | 19 | 49 | 24 |
Junction Figure 399 3/4” x 25 mm | 3/4″ | 25 | 52 | 30 |
Junction Figure 399 1” x 30 mm | 1″ | 30 | 57 | 38 |
Junction Figure 399 1 1/4” x 40 mm | 1 1/4″ | 40 | 65 | 47 |
Junction Figure 399 2” x 60 mm | 2″ | 60 | 80 | 64 |
Junction Figure 399 2 1/2” x 76 mm | 2 1/2″ | 76 | 96 | 84 |
All measurements are expressed in millimeters and inches.
Reviews
There are no reviews yet.