Stainless Steel Male Reducer Sleeve Figure 245
General characteristics
The figure is a straight reduction with two ends, one of them larger than the other, both mouths have a male thread, that is, an external cylindrical thread. The general characteristics of the figure are as follows.
- Made of 316 quality stainless steel with a satin finish.
- Cylindrical thread type with dimensions compatible with the EN10226-1 standard
- The figures are marked with the quality and dimensions of the piece.
Measurements of the Figure
All measurements are expressed in millimeters
Product | L1 | L2 | m | ØD | Ø d | AND |
Reducer Sleeve 1/4 x 1/8” | 8 | 10,5 | 4 | 8 | 5,5 | 14,5 |
Reducer Sleeve 3/8 x 1/4” | 11 | 11 | 5 | 11,5 | 8 | 19 |
Reducer Sleeve 1/2 x 1/4” | 11 | 14,5 | 5 | 15 | 8 | 23 |
Reducer Sleeve 1/2 x 3/8” | 11 | 14,5 | 5 | 15 | 11,5 | 23 |
Reducer Sleeve 3/4 x 1/2” | 14,5 | 15,5 | 5,5 | 20,5 | 15 | 28 |
Reducer Sleeve 1 x 3/8” | 13,5 | 18 | 7,5 | 26 | 11,5 | 35 |
Reducer Sleeve 1 x 1/2” | 14,5 | 18 | 6 | 26 | 15 | 35 |
Reducer Sleeve 1 x 3/4” | 15,5 | 18 | 6,5 | 26 | 20,5 | 35 |
Reducer Sleeve 1 1/4 x 3/4” | 15,5 | 20,5 | 6,5 | 34,5 | 20,5 | 44 |
Reducer Sleeve 1 1/4 x 1” | 18 | 20,5 | 6,5 | 26 | 34,5 | 44 |
Reducer Sleeve 1 1/2 x 1” | 18 | 20,5 | 6,5 | 40 | 26 | 51 |
Reducer Sleeve 1 1/2 x 1 1/4” | 20,15 | 20,5 | 6,5 | 40 | 34,5 | 51 |
Reducer Sleeve 2 x 1” | 18 | 25 | 7 | 51 | 34,5 | 62 |
Reducer Sleeve 2 x 1 1/4” | 20,5 | 25 | 7 | 51 | 34,5 | 62 |
Reducer Sleeve 2 x 1 1/2” | 20,5 | 25 | 7 | 51 | 40 | 62 |
Part Applications
- Chemical industry, petrochemical industries and natural gas.
- Food industry.
- Industrial environments with corrosive media and extreme temperatures.
- Conduction of fluids.
- Boilers, condensers, heat exchangers and reactors.
Reviews
There are no reviews yet.